Five-coat acrylic system on a rubber carpet especially designed to fit EN 14877 standard requirments (Synthetic surfaces for outdoor sports areas)
The particularity of the COURTSOL COMFORT system lies in tests to answer to the EN 14877:
-Resistance to wear under dry and wet conditions
-Friction before and after aging
-Evaluation of the color change
Glue : COURTSOL Polybond
Carpet : Rubber 10mm
Pore-filler : COURTSOL Resibase BP
Intermediate coats : COURTSOL Resibase
Wear-resistant coat : COURTSOL Resitop
Paint coat : COURTSOL COLOR
Lines marking : COURTSOL Lines
Good colour and UV stability.
Perfect evenness and aestheticism.
Game quality and a very enjoyable playing experience.
High mechanical resistance and good longevity of the system.
Low glare in sunny weather.
The coating obtained is exclusively assigned to sport practices and the players must imperatively wear the appropriate shoes (such as tennis or basket with white soles. Black soles are to proscribe).
Remove tree leaves on regular basis from the court.
Sweep and/or clean with clear water at least once a month or more often according to the surface’s state.
Curative and preventive decontaminating solution for a remedial treatment of surfaces biologically polluted by mosses or moulds.
Acrylic coating reinforced with coarse sand to patch and level new or old surfaces. Mixed with cement, this superior patching compound enables correction of deep depressions up to one centimeter, as well as minor irregularities of the surface.
Acrylic emulsion with predispersed medium sized aggregates used for intermediate coats of Courtsol multicoat systems.
Acrylic emulsion with predispersed fine size mineral aggregates. Results in a fine anti-ski texture surface for sure footing and reliable ball bounce.
Quality pigmented synthetic resin, with a wide range of colours. Imparts a very appreciated tough wearing and anti-reflective colored finish. To be applied in two coats over concrete or asphalt after application of primer or as top coat in order to obtain a smoother aspect and therefore a faster surface.
Acrylic paint for line marking delivered ready to use to be applied in a single coat. Available in white and other playgrounds marking colours.
A solvent free two component polyurethane adhesive. The POLYBOND is designed for the gluing of rubber and foam mats in the construction of synthetic sport and playing surface.