NL COMFORT System
1 November 2021
COMFORT System
1 November 2021

Courtsol
COMFORT FINISH PLUS System

5-layer system on a 4 to 10 mm rubber mat for surfacing old or new sports grounds, concrete or asphalt, in new or renovation work.

The COURTSOL COMFORT FINISH PLUS system, when used with a 10 mm rubber mat, is specially designed to meet the EN 14877 standard (Synthetic Surfaces for Outdoor Sports Fields).

With a 4 mm to 10 mm rubber carpet, this ITF 4 certified system is used both indoors and outdoors.

Court designer


Technical
informations

Composition of the system :

Glue : COURTSOL POLYBOND
Carpet : Rubber 4 mm to 10 mm
Pore-filler : COURTSOL RESIBASE BP
Intermediate coats : COURTSOL RESIBASE
Wear-resistant coat : COURTSOL RESITOP
Paint coat : COURTSOL COLOR
Lines marking : COURTSOL LINES

System features :

Outdoor or indoor use.
Good colour stability and UV and weather resistance.
Improved quality and comfort of play.
High mechanical strength and longevity of the system.
EN 14877 certification (Outdoor with 10 mm mat).
ITF 4 certification (Indoor / Outdoor with 4 mm to 10 mm mat).

Practical recommendations :

The coating obtained is exclusively assigned to sport practices and the players must imperatively wear the appropriate shoes (such as tennis or basket with white soles. Black soles are to proscribe).

System maintenance :

Remove tree leaves on regular basis from the court.
Sweep and/or clean with clear water at least once a month or more often according to the surface’s state.

Design your court

Court simulator

System
details

Courtsol
Fongimur

Preventive and curative decontamination solution to combat the appearance of moss, algae and fungi.

Courtsol
Polybond

Two-component solvent-free polyurethane adhesive designed to bond rubber/cork mats to concrete or asphalt for the installation of synthetic and sports surfaces.

Courtsol
Rubber Carpet

4 to 10 mm rubber mats specially selected for the Courtsol COMFORT and COMFORT FINISH PLUS systems.

Courtsol
Resibase BP

Coating based on acyclic resin reinforced with coarse grain size fillers, intended for filling new surfaces and for levelling very uneven surfaces. When mixed with cement, it can also be used to remove large thicknesses.

Courtsol
Resibase

A flexible, solution-dyed synthetic coating based on acrylic resin and medium-sized fillers. It is used as an intermediate layer in Courtsol multi-layer systems.

Courtsol
Resitop

Synthetic finish based on acrylic resin and fine-grain fillers. It provides a very fine-grained surface for accurate ball rebound and optimized anti-skid properties. Used as a finish in ITF 3 systems.

Courtsol
Color

Anti-skid paint with a high acrylic resin content and selected pigments that provides a non-reflective matte finish. Can be applied in two coats on previously printed concrete and asphalt or as a top coat to obtain a smoother appearance and therefore a faster surface. Thanks to this component you obtain the Courtsol FINISH PLUS finish.

Courtsol
Lignes

High coverage line marking paint formulated for one-coat marking. Available in white and in approved colors for all-sports scribing.

Court designer
EN